How to Use BT715 Do Battery Test?


This post will show you how to use Foxwell BT715 to do a battery test.

Battery Test is mainly used to check the cold cranking capability and the aging status of the battery. It informs the user to replace the battery before the battery is getting aged.


To start a battery test:
1. Scroll with the UP or DOWN button to highlight Battery Test from Main Menu and press the ENTER key.


 
2. Scroll with the UP or DOWN button to highlight the voltage from Main Menu and press the ENTER key



3. Scroll with the UP or DOWN button to highlight the TEST TYPE from Main Menu and press the ENTER key.



4. Scroll with the UP or DOWN button to highlight OUT OF VEHICLE or IN VEHICLE from the BATTERY LOCATION menu and press ENTER



5. Scroll with the UP or DOWN button to highlight TOP POST or SIDE POST from the POST TYPE menu and press ENTER to select the battery post type.


6. Scroll with the UP or DOWN button to select the battery type from the BATTERY TYPE menu and press ENTER to confirm



7. Scroll with the UP or DOWN button to select the battery standard from the BATTERY STANDARD menu and press ENTER to confirm. Not all rating systems are available for each application.



8. Use the UP or DOWN button to change the measuring range till you enter the correct range of your battery. Press ENTER to start the test.


9. View test results on the screen. Depending on battery status, one of the following test results may display.





NOTE The tester keeps the results of the last test only. When you start a new test, the last results are overwritten.

For more function process, please check the User Manual